Electrical load torque tester use

Before using the electrical loading torque tester, the tester to determine whether enough power, and then turn on the power switch.
1, to a fixed torque tester, you can use fixed knob.
2, before using the torque tester, battery tester to determine the adequacy, then turn on the power switch.
3, adjust the zero knob torque tester to do before the value zero.
4, according to the testing needs, choose the unit switch to adjust the torque units.
5. Select the desired measurement mode, followed by measuring the mode switch is selected or peak value.
6, when the need to measure the maximum peak, set the mode switch to a peak profile, measured values will be retained for more than five seconds. If you press the reset button, the data is automatically cleared to zero.
7, depending on the analyte to select the matching box with safety test accessories. When using a torque tester measuring electric screwdriver or pneumatic screwdrivers and other tools, the choice of the appropriate test accessories placed in the test sensor head
8, after the measurement is completed, turn off the power, remove the attachment and the analyte.